Supply Of Boq Plungers - Plunger With Hard Chrome Plating No 6.000 72791.00 Size- Dia. 47 +0.0/-0.01 Mm X 300.5 Mm Hard Chrome Plating Length X 400 Mm Overall Length , Hard Chrome Plating Thickness- 0.30 Mm (maximum) , Hardness Of Hard Chrome Plating After Grinding- 65-70 Hrc , Surface Finish After Hard Chrome Plating- 0.8 Microns , Material Of Construction- Astm A276 Gr. 420 (forged & Normalised) , As Per Drawing No.- Nfv/ex/u/m-122 Rev. 3 , For H. P. Washing Pump 31-p-11a/b , Plunger With Hard Chrome Plating No 4.000 8564.00 Size- Dia. 20 +0.0/-0.01 Mm X 297.2 Mm Hard Chrome Plating Length X 310 Mm Overall Length , Hard Chrome Plating Thickness- 0.30 Mm (maximum) , Hardness Of Hard Chrome Plating After Grinding- 65-70 Hrc , Surface Finish After Hard Chrome Plating- 0.8 Microns , Material Of Construction- Aisi 316 , As Per Drawing No.- Nfv/ex/u/m-120 Rev. 3 , For Stripper D.p Cell Flushing Pump 31/41-p-17a/b Total - 81354.10 , Plunger With Hard Chrome No 9.000 12000.00 108000.00 Plating Size- Dia. 55 +0.01/-0.00 Mm X 405 Mm Hard Chrome Plating Length X 580 Mm Overall Length , Hard Chrome Plating Thickness- 0.30 Mm (maximum) , Hardness Of Hard Chrome Plating After Grinding- 65-70 Hrc , Surface Finish After Hard Chrome Plating- 0.8 Microns , Material Of Construction- Aisi 410 , As Per Drawing No.- Nfv/u/m-132 , For H. P. Washing Pump 11-p-11a/b. , Plunger With Hard Chrome No 6.000 2500.00 15000.00 Plating Size- Dia. 20 +0.0/-0.02 Mm X 190 Mm Hard Chrome Plating Length X 260 Mm Overall Length , Hard Chrome Plating Thickness- 0.30 Mm (maximum) , Hardness Of Hard Chrome Plating After Grinding- 65-70 Hrc , Surface Finish After Hard Chrome Plating- 0.8 Microns , Material Of Construction- Aisi 410 , As Per Drawing No.- Nfv/u/m-125 , For Stripper D.p Cell Flushing Pump 11/21-p-17a/b. , Plungers For Ammonia Feed Pump With Following Specification- Material - Astm A 276 Grade 420 ( Chrome Plated ) , Dimension And Notes As Per Drawing Nfv/u/m-155 , Hardness Of Chrome Plated Surface- 550-600 Bhn , Dp Check As Per Se-165. Inspection And Testing Under Third Party As Per Technical Note. , Plungers For Ammonia Feed Pump With Following Specification- Size- Dia. 65 +0.0/-0.01 Mm X 375 Mm Hard Chrome Plating Length X 550 Mm Overall Length , Hard Chrome Plating Thickness- 0.30 Mm (maximum) , Hardness Of Hard Chrome Plating After Grinding- 65-70 Hrc , Surface Finish After Hard Chrome Plating- 0.8 Microns , Material Of Construction- Astm A276 Gr. 420 (forged & Normalised) As Per Drawing Nfv/u-ii/m-210 Rev 01 , Hardness Of Chrome Plated Surface- 65-70 Hrc , Dpt Check As Per Se-165 , Under Inspection By Lris/bv With Scope As As Per Technical Note. , Plunger With Hard Chrome Plating , Size- Dia. 60 Mm X 178.5 Mm Hard Chrome Plating Length X 300 Mm Overall Length , Hard Chrome Plating Thickness- 0.30 Mm (maximum) , Hardness Of Hard Chrome Plating After Grinding- 55-60 Hrc , Surface Finish After Hard Chrome Plating-0.8 Microns , Material Of Construction- Astm A276 Gr. 420(forged & Normalized) , As Per Drawing No.- Nfv/ex/a-ii/m-103 Rev.0 , For L. P. Ammonical Water Pump P-3522a/b.